When to Use PSD system?

Today there was a comment on Name of specific Industries where we can use PSD (Pressure Swing Distillation) system on my previous article. Out of interest of few visitors I would like to suggest few points.

Also this post onwards, I will try to post very short posts but may be many on the same topic.

Request feedback from all of you on this kind of posts.

See, the pressure swing distillation means - More than one distillation columns in series but at different pressures to achieve the desired purity of one component due to shift in Azeo condition with respect to pressure.

Let me explain again.....with an Example of Ethanol & Ethyl Acetate mixture.
As per literature data, the composition at two different pressures are as below

Pressure Ethanol Ethyl Acetate
760 mm Hg 31% 69%
1500 mmHg 39% 61%
300 mmHg 23% 77%
25 mmHg 13% 87%

Considering the wide difference in Azeo composition in the given system, If I choose say 1500 mmHg pressure of first column & 25 mmHg pressure of second column then the first column top will be richer (Feed is 69% EA & 31% Ethanol at ambient condition which is generally expected from any system) in Ethanol.

This is because top composition will be azeo composition at 1500 mmHg pressure i.e. 39% Ethanol while feed is having 31% Ethanol, so bottom shall be More EA, thus it is possible to get pure EA at the bottom......Wait if you are not clear.....read more below.

Now top of first column which is 39% Ethanol & 61% EA is fed to second column which is operating at say 25 mmHg. Now at this pressure Azeo composition is 13% Ethanol. So most of the Ethanol will settle at Bottom & EA rich top will be (13% Ethanol + 87% EA) coming out from top.

Now this top stream of second column is fed back to first column along with feed. So feed will further get rich in EA. So more EA will settle at the bottom of second column. BUT top will remain same at Azeo of 1500 mmHG & will go to second column again.

Thus with this kind of cycling eventually you will end up with pure EA at bottom of first column and Pure Ethanol at the bottom of second column. All tops will be fed to next column through recycling. This is how PSD works for any system.

However, the limitation is if difference in the Azeo compostion is small then you may need more such columns OR it may not be possible to use PSD at all.

Hope it is more clear now....

Get Free Updates: *Please click on the confirmation link sent in your Spam folder of Email*

Continue to read this post...

Collapse this post back.

Process Intensification - 4, Loop Reactor

Process Intensification has been our focus since last few posts and I have already covered two most common and most discussed equipments under this topic. Static mixer - which are already in use by the industry and Micro Reactors which are still waiting for good response from industry.

Similarly the third one which is specifically used in few of the industries is Jet Loop reactors which also qualifies to PI category - One particular configuration developed by BUSS Chem Tech

So we are going to discuss loop reactors with different variations in the configuration e.g. simple circulation loop reactors, venturi reactors etc. & then finally Jet reactors which are derived from above systems.

Now let us start from the beginning on these reactors. In the beginning only CSTR were there & at that time need was felt of increasing the mass transfer as well as heat transfer but the invention of putting a circulation loop with one heat exchanger was only based on the objective of increase in heat transfer area so as to reduce the batch cycle time & this is how the concepts of various loops came into picture.

CSTR

The above CSTR configurations were developed around 1930s.

Simple Loop Reactor
So simple configuration was similar to the following diagram for a general circulation reactor. They were developed around 1950s.


Now as you see, the exchanger in the loop is for providing faster heat transfer outside the reactor due to limitation of heat transfer area in the given volume of CSTR type vessel. So basically it was due to very low surface area to volume ratio of CSTR (As shown in Micro Reactors article).

Another version was developed with static mixer in the upstream of exchanger for very quick reactions to remove the heat as soon as reactants react. They were developed around 1960s.



Loop With Spray at Top
The next generation of loop reactors was with spray type nozzle at the top as shown in the picture. In fact, they are designed for enhanced GAS LIQUID interaction by providing a top spray in the gas zone.




Loop Reactor with Venturi
Further improvements in the loop reactors were done by introducing a venturi in the system. This was slightly different than first picture of this post. The difference was in the discharge zone of venturi, the discharge in this type of reactor was at the inlet of reactor - no mixing in liquid zone as shown in the picture. This was mainly developed to enhance the circulation of gas from the top headspace of the reactor to minimize the safety issues with hazardous & explosive gases.

Jet Loop Reactor
The Next generation loop reactors are Jet Loop reactors as shown in the first picture from BUSS reactor. The difference here is that the Jet mixes with liquid with a very high speed & therefore the reaction speed goes very high in the mixing zone of the Ejector. For example, the reaction rate can be increased by a factor of say 25 - 40 times in a jet reactor compared to CSTR.

So if you think you need higher capacity from your existing system of CSTR etc. OR if you are planning to design a reactor for slow gas liquid reactions then think on considering a loop reactor with circulation exchanger for faster heat transfer + plan for either a SM in the piping or plan for a eductor at the bottom of reactor which will thoroughly agitate your liquid mass.

Get Free Updates: *Please click on the confirmation link sent in your Spam folder of Email*

Continue to read this post...

Collapse this post back.

Process Intensification - 3, Micro Reactors

In the series, the next most interesting & commonly known equipment is the micro reactors, the buzz word of the current times in process engineering. First article on introduction of PI is Here & Second article on Static Mixers as PI equipment is Here.

As name suggests - Micro - means mini - reactor is a device in which chemical reactions take place in a confinement with typical lateral dimensions below 1 mm; the most typical form of such confinement are microchannels or capillaries. The microreactor is usually a continuous flow reactor. Microreactors offer many advantages over conventional scale reactors, including vast improvements in energy efficiency, reaction speed and yield, safety, reliability, scalability.



I am not going in to too much theory & I am directly putting up examples for quick understanding of underlying principles & benefits due to the changes.

So, Let us first see the advantages & disadvantages of Micro Reactor Technology (MRT).

Benefits

1. Very high surface to volume ratio

To see this more clearly, I am using one example from Sigmaaldrich website. Let us understand it by comparing a case of CSTR & MRT.

Case-1 CSTR
This is an example of CSTR of 1 KL at 500 rpm for an exothermic case with outside cooling.



In this case you can see that temperature distribution os very uneven & hence the reaction control, quality etc are not uniform.

Case-2 MRT

In this case, the temperature distribution is so uniform that quality is controlled in a much better way.

Therefore, because of very high surface area / unit volume of reaction mass, the control on heat transfer is very very good compared to CSTR. This is very important factor, if you can realize the importance of this aspect of any reactor. This factor alone can result into many significant differences e.g. very good conversion, lower level of impurities, higher yield etc.

Just to see the impact Do you Know, what are the typical values of surface area to per unit volume - This is

- 6 Sq Meter / cubic Meter of reactor volume for CSTR
- 100 Sq Meter / cubic Meter of reactor volume for 100 mL glass flask
- 20000 Sq Meter / cubic Meter of reactor volume for Micro Reactor.

Yes, it is almost 15 times more in Laboratory & this is the main area where most of the lab scale & bigger scale differences occur. AND Oh! my GOD - 3000 times more in MRT. My suggestion - Buddy forget Micro reactors, invent something which can just give you say 1000 Sq Meter / Cubic meter of volume, It can do wonders - believe me


2. Better mixing

Since, the micro volumes are mixed in a capillary, the mixing is instant & uniform. Due to very high length of the mixing path per unit volume compared to any other reactor the design is very effective. Therefore, the unformity of mass is almost same in the entire reactor and hence more uniformity in quality can be achieved.

This is very important aspect in some of the industries related to performance chemicals e.g. ethoxylates where more & more unformity (peak ethoxylates) is desirable.

Ultimately this results in very good purity of product by suppressing the impurities formation and very high yields due to the same factor.


3. Instant removal of the material out of the reaction zone

The holding volumes or system volumes are so low that they do not affect the reactions & therefore even equilibrium reactions can achieve higher per pass conversions due to very quick removal of products as soon as they are formed.

Therefore, this is very important in case of equilibrium driven reactions or where yield are impacted significantly due to side reactions and where the product is sequentially converted to other byproducts

Suppose you are conducting one reaction A -> B -> C & your final product is B. Also consider the case where A ->B & A -> C reactions are happening. Then in a CSTR you will either reduce the conversion of A to limit concentration of C or you will optimize parameters to suppress C in second case. But in MRT, there is very little formation of C in either case due to very low volumes especially in first reaction.

Hence, you can have very high conversion saving recycles of A and higher yield due to lesser formation of C.


4. Improved Safety

Since the volumes handled are very less - micro litres - the hazardous reactions can safely be carried out in MRT and very little efforts & investment is required in case of hazardous / run away reactions e.g. polymerisation or ethoxylation or explosive materials handling.

Therefore, investments required on safety systems, instrumentations, losses due to release of chemicals / pressures etc & hence they are environment friendly also.


5. Very High Heat Flux

Microreactors typically have heat exchange coefficients of at least 1000 kW / M3 / K to 500000 kW / M3 / K vs. a few kilowatts in conventional glassware (1 l flask ~10 kW / M3 / K). Thus, microreactors can remove heat much more efficiently than vessels and even critical reactions where exotherms are very high & instantaneous, can be performed safely at high temperatures.

This factor is also very important for example nitration is a very quick & highly exothermic reaction in general which can be safely carried out in MRT.


6. Continuous Processes

Microreactors are normally operated continuously. This allows no batch hold ups & higher time cycle before workup. Important aspect in case of unstable compunds where holding time results in more byproducts or side products formation & hence higher selectivity.

Mixing in a batch process causes a very different concentration profile compared to Continuous process. In a batch, reagent A is filled in and reagent B is slowly added. Thus, B encounters initially a high excess of A. In a microreactor, A and B are mixed nearly instantly and B won't be exposed to a large excess of A. This may be an advantage or disadvantage depending on the reaction mechanism.

So many reactions where batch is a forced neccesity due to full conversion desired, the MRT can be used as continuous option. In such cases there is no other technology available till date other than PI which can help in converting batch to continuous with 100% conversion.


7. No Scale Up Required

Since the MRT is just a module technology no further scale up is required form lab to commercial scale. Only addition of similar micro reactors will add up the capacity. This reduces product development cycle time & also losses in scale up during piloting, manpower, efforts & Energy is also saved.

Now let us understand disadvantages or rather problems in using MRT.
Concerns

1. Only Liquid Systems

MRT is still struggling in terms of handling gases & solids and only liquid liquid reactions are well performed. I see this as a area for improvement required in MRT rather than a problem. May be why solids in MRT is my first question OR when we are talking about Micro why not nano particles if any solid catalyst is required.

Yes, reactions with solids as reactants will still be a problem.

Regarding gases handling, the problem is not so critical its a matter of pressure handling but yes it is a concern as of now.

Hope it is useful for all of you & now you will start thinking on using them.

Get Free Updates: *Please click on the confirmation link sent in your Spam folder of Email*

Continue to read this post...

Collapse this post back.

ISO - Standard or Business - 5

Further, is it true that ISO is for people, their safety, their interest as consumer etc...etc.???

ISO Claims - "They are useful to ...........and, ultimately, to people in general in their roles as consumers and end users"

Ha...Ha...Ha....Consumers, who do not even know what for this company is having ISO. is it for product or for finance or for purchase or ......?????

HAVE YOU EVER FELT ANY PROTECTION DUE TO ISO.........

See my previous articles on ISO - Part-1, Part-2, Part-3 & Part-4.

Consumers do not know anything about ISO coverage & even for a multi product company it is not clear If all the products of this company are covered under ISO or not. ISO is safeguarding them against harmful content in the product or not. The raw material which is used in this product is having or not having any quality issue which ISO can not guarantee as purchase process is not covered under ISO. All these facts are not known to any consumer in general & still ISO claim to safeguard & to be beneficial to the consumer & end user.

Company can enjoy good image in the market becasue they only publish "ISO:9000 Certified"........other info is missing. Why???? Because blindly every one is asking for only ISO certificate.........it doesn't matter if it is only for your HR (There is no link to product in this case but this is also sufficient).

I also know multi product / multi location companies where only one certificate is used for the entire company and therefore question comes - is everything covered?

The biggest flaw, still ISO claims for safeguard of consumers...HOW???? can anyone justify this?

Fed up man...Im impatient to write more on this topic. So will stop here & may come back later if I go through this subject in future.

Learning -4 It cannot be beneficial to consumers unless it is product & value chain focused. Currently it is process focused only that too with many exclusions permitted.

Disclaimer - This is a series of my personal views on ISO systems, its implementation, Effectiveness etc. They do not carry any legal issue related to my personal views under the human right of "Freedom of Speech".

Get Free Updates: *Please click on the confirmation link sent in your Spam folder of Email*

Continue to read this post...

Collapse this post back.